Write a Review

These 8-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel-plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 8-speed systems - Steel lock ring Gear combinations: - 12-25T: 12-13-15-17-19-21-23-25 - 11-28T: 11-13-15-17-19-21-24-28 - 11-32T: 11-13-15-18-21-24-28-32 - 12-32T: 12-13-15-18-21-24-28-32 - 11-34T: 11-13-15-18-21-24-28-34

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

For over two decades, Terry has worked with all levels of riders and addressed all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. One of the best values you can buy in an Italian-made saddle, the Butterfly Cromoly is also one of the most popular saddles in the Terry line. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails that allow us to save a few euro and make this variation a great deal. - Length x width: 262mm x 155mm - Weight: 326g / 11.5oz - Rails: FeC alloy - Cover/features: smooth Dura-tek with printed accents - Made in Italy

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish

Rock The BB Precise fit, smooth-rolling operation, long-living performance–what more can you ask for from a bottom bracket? Install a 30mm CINCH crankset friendly PF30 and get riding...and keep riding. Rolling deep The PF30 bottom bracket uses reliable 6806 retainer bearings packed with waterproof grease, along with wiper seals to keep the gunk out. Close Enough Won't Cut It We fired up the ol' CNC machine to make sure the anodized 30mm alloy cups of this bottom bracket provide an exact, perfectly quiet fit for your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and the appropriate spacers to ensure a perfect fit.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation - Bead blasted & anodized black finish

Shimano's 11-speed SLX cassette features the same computer-designed shift profiles that have made Shimano shifting synonymous with speed and accuracy. - Series: SLX - Average Weight: 467g

Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Specialized's ultra-light Power Expert saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff, carbon-reinforced shell for longevity and all-day riding efficiency - Lightweight and supportive PU padding for comfort and support on longer rides - Lightweight and durable hollow titanium rails - Tough, light and water-resistant cover - Level 2 padding: Medium density foam; bike feel with additional cushioning - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Size 130mm / Weight 230g - Size 143mm / Weight 233g - Size 155mm / Weight 235g - Size 168mm / Weight 238g

Wrap your handlebars in comfort, luxury and style with Salsa's Gel Cork Tape. It's made from cork with a vibration-damping gel backing and is embossed with the Salsa logo. And, with a variety of palette-pleasing colors to choose from, you're sure to find your favorite one!

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Fits 110 BCD 5 arm cranksets Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 110 BCD 5-arm cranksets. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Recommendations - Recommend the use of a clutch-style rear derailleur for the best chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g - Material: 7075-T6 aluminum - Made in the USA

The World's Most Technologically Advanced Saddle Pad. Lifetime Weatherproof Guarantee. - Great Waterproof Cover - Figure-8 Drawstring For A Secure Fit - Friction-Free Gel - Cover Material: Weatherproof - Length: 247mm - Width: 182mm - Weight: 196g

Experience the precise, positive feel of SRAM with their X7 Trigger Shifter Set. They're perfect for casual and serious riders alike thanks to their compact aluminum and composite bodies that reduce weight and boost strength. And, the X7s feature SRAM's 1:1 actuation ratio for the ultimate in crisp shifting.

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

SRAM's X-Sync Road Chainrings are designed for provide maximum control when used with AXS road cranksets. - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Can be installed with a single tool, making gearing changes a breeze

Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.

The Alpinist Stem is a light and stiff alloy stem. Designed to perform during big attacks in the hills and furious bunch sprints, while weighing just 110g for featherweight performance when the road goes up. With classic lines, traditional clamp, and huge range of lengths and rise angles, this stem earns the Alpinist name as the ideal upgrade to almost any bike. LIGHT: Every Alpinist product puts a premium on lightweight, because we know lightweight is a key ingredient to creating magical ride quality. Using premium 7075 Alloy and Ti hardware, the Alpinist stem weighs a feathery 110grams in a 110mm length. STIFF: 3D Forged and CNC machined, despite its feathery weight the Alpinist stem delivers the stiffness needed for big power and precise, sharp handling in the most challenging situations. FIT: With seven lengths to choose from, and three different angles of rise, you know you'll find your perfect fit with the Alpinist Stem. Its classic lines, polished black finish, and traditional 31.8mm clamp make it an aesthetic fit with almost any bike. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Lengths: 70, 80, 90, 100, 110, 120, 130mm - Rise: 6, 12, or 17-degree rise - Weight: 110-115g (for 110mm) - Clamp Diameter: 31.8mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"

True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. Specifications: - CRANK ARM LENGTH: 165mm, 170mm, 175mm - BB SPINDLE INTERFACE: DUB - BB COMPATIBILITY: All SRAM MTB WIDE DUB BBs, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - SPEEDS: 12 - CHAINRING MATERIAL: No rings - BOLT CIRCLE DIAMETER (BCD): Direct Mount (DM) - CHAINLINE: 55.0mm, n/a - CHAINRING SIZE: No rings

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

Rugged durability comes naturally to the XX SL Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains

Well known for its long body and flat profile, the Phenom is the shape of choice for many of the best racers in the world, ranging from Tour of Flanders winner Kasper Asgreen to World DH Champion Loic Bruni. Like every saddle we make, the S-Works Phenom with Mirror was ergonomically designed and scientifically proven - our Body Geometry methodology - combined with our Mirror 3D printing - resulting in 28% less pressure, right where it counts. Body Geometry: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don't just promise to solve these issues for men and women — we've scientifically proven they do. SOFT TISSUE RELIEF: Using a concave shape and ultra-compliant carbon shell, we've created a space for a thicker Mirror print, using 20,055 struts and 8,735 nodes - resulting in a 28% reduction in sit bone pressure compared to a traditional foam saddle, measured by our ultra high-resolution pressure mapping. PERFORMANCE-INSPIRED SHAPING: Being our longest and flattest saddle from tail to nose, the S-Works Phenom with Mirror's shape and construction enables maximum movement for optimal positioning for power - enabling riders to easily adjust their position on the saddle for tempo efforts and supports riders movement in and out of the saddle on climbs. - Patented Body Geometry technology is ergonomically designed and scientifically proven to increase blood flow to sensitive arteries. - Longest and flattest, Mirror saddle, from nose to tail to date at 27cm. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light oversized carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seat posts equipped with side-load clamp mechanisms for 7mm round rails. - Size 143mm / Weight 223g - Size 155mm / Weight: 227g

Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum