Car Racks

TK2 TRACKER KITS Tracker Kit 2

TK4 TRACKER KITS Tracker Kit 4

TKCAP TK Base Cover (4 pk)

Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.

Thule's ThruRide roof-mounted bike carrier makes it easy to mount almost any bike with a thru-axle fork—no adapters needed. The ThruRide fits forks with 12-20mm thru-axles on anything from fat bikes to XC race rockets to downhill rigs. To load your bike, simply remove the front wheel and re-install the thru-axle into the fork. Lift the bike into the rack, and close the convenient one-handed clamp down on the axle. Then, dial down the clamping pressure to give your bike a secure ride. The ThruRide also works with traditional 9mm quick release forks using an adapter (535SKR sold separately). The rear of the rack is crafted from Thule's aerodynamic "D" shaped low-profile tray. And, tool-free universal mounting makes the ThruRide easy to install on Thule rack systems, as well as round bars and most factory racks.

Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier. - Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers - 250 lbs weight limit carrying capacity - Provides a 2.25" drop for improved tailgate/rear door clearance - Bolt fixation to vehicle - Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)

Easily mount your license plate to the platform and hanging hitch bike carriers. - Provides an unobstructed view of vehicle tag for improved visibility - Versatile attachment straps can be secured to both horizontal and vertical surfaces (rack or bike) - Integrated light for nighttime plate visibility conforms to FMVSS108 safety standards and includes a universal four-pin connector with quick connection - Easily rotate holder on the carrier for use in 'stowed' or 'in-use' position - Captured attachment mechanism inhibits tampering of license plate

Premium fork mount roof bike rack for the bike enthusiast with fast and easy mounting for both Thru-axle and standard Quick-release bikes. - Easily mount Thru-axle bikes (9-15mm) and standard Quick-release bikes (9mm). Fits 20x110mm Thru-axle bikes with an additional adapter (sold separately) - Accommodates bikes with disc brakes - Fasten your bike to the fork adapter on the ground for easy mounting - The bike slides into the carrier on a guided track on the fork adapter and clicks into place - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to audible and visual confirmation of correct mounting - Unmount bikes from the rack easily with a release lever - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other

Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.

Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)

Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.

- Pack includes 2 wheels straps and 2 road adaptors - The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. Features - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Loading width: 50-inch - Length: 50-inch - Maximum load: 220-pound. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 150cm / 60 in

- High security key allows for easy access with only a half-turn to unlock - Premium chrome plated for maximum rust protection - 8.5 ft. long 10mm security cable with hitch pin adapter

Coastal Hull Pads have a non-slip finish on the side that contacts your vehicle, keeping your canoe or kayak in place while transporting it. - Carries: Single canoe, kayak, surfboard, or SUP - Fits the bottoms of most canoes/kayaks to support them while transporting on roof of vehicle - Ideal for use on a bare car roof - Fits most profiles of OEM Cross bars - Integrated non-skid underside helps protect vehicle's finish for direct-to-roof use, versus wrapping OEM or aftermarket cross bars - Includes 2 pads per kit

A simple yet effective and safe solution to carry your kayak. Looking for the ability to carry either a kayak or a canoe? The Coronado, with its 4 padded rotating saddles, allows for easy loading and scratch-resistant travel. The tie-downs along with bow/stern ropes will keep you stable when driving to the water. - Universal mount fits round, square, and 3.5" oval cross bars - Saddles pivot to assist loading - Includes: 4 saddles, 2 tie-down straps with cam lock buckles, plus bow and stern straps

The Current is our heavy-duty rack which allows for use on either 1-1/4" or 2" hitch receiver. It also has a higher weight capacity per bike at 60lbs, making it e-bike approved and also accommodating Fat Tire bikes with tire widths up to 5"! The Current comes with locking ratchet hooks and a locking hitch pin to keep your bikes and rack secured to your vehicle. It has the ability to tilt away from your vehicle with bikes mounted for rear vehicle access, and it folds up when not in use. This rack is everything you need all in one! - Carries: 1-2 bikes - 1-1/4" or 2" hitch receiver - Weight capacity: 60lbs per bike - Fat Tire bike-compatible up to 5" wide - Tilts and folds away from vehicle while bikes are loaded - Includes locking threaded hitch pin - Rack weight: 59lbs

Whether it’s a city bike with a step-through frame or full-suspension mountain bike, some bikes just may not work well with a car rack that suspends the bike from its top-tube. Swagman's Deluxe Bar Adapter changes that. This telescopic bar hooks under the stem and around the seatpost to create a "top tube" that the rack can hold. It features vinyl-coated, quick release hooks so it's gentle on your bike and easy to use. The 19-inch Deluxe Bar expands up to 26-inches in length.

The Swagman | E-Spec can be used on a 2" hitch receiver and is capable of carrying two bikes with a weight capacity of 70lbs. per bike anywhere! The E-SPEC comes with locking ratchet hooks and locking hitch pin to keep your prized possessions safe. - Fits Class 3 2" Hitch Receivers - Fits 20" to 29" wheels - Fits tires up to 3" wide - Carries up to 2 eBikes with a maximum weight capacity of 70lbs per bike - Adjustable Locking Ratchet Hooks - Fits most frame sizes, shapes and styles - Step Through/Cruiser Style bikes require the use of a Bar Adapter - When being used on a car, truck or SUV it can be folded up - When being used on an RV or Motorhome, the provided RV Bolt is required - Locking Threaded Hitch Pin - Rack Weight: 63lbs

Want to double the bike-carrying capacity of your Swagman Semi 4.0 bike rack? The Semi 4.0 2-Bike Add-On attaches to the Semi 4.0 (sold separately) for additional bike-carrying capacity. - Zero frame contact - Patented design - Fits 20-inch to 29-inch wheels - Fits most frame sizes, shapes, and styles - Ratcheting arms only grab the wheels - Rear wheel ratchet straps firmly hold the bike by the rear wheel - Carries up to 2 extra bikes - Fits Semi 4.0 (#64698) to create a 4-bike Semi 4.0 - Max. load: 45 lbs. per bike

Swagman's Semi 4.0 Platform Hitch Rack securely carries up to two bikes with minimal lifting necessary to load up and go. The ratcheting arms only grab onto the wheel of the bike, so multiple frame shapes and wheel sizes can be accommodated. - Zero frame contact - Patented design - Fits 20” to 29” wheels - Ratcheting arms only grab the wheels - Integrated locking cable included - Carries up to 2 bikes - Fits 2” hitch receiver - Rear wheel ratchet strap firmly holds bikes and secures wheels - Semi 4.0 transforms from 2 bike to 4 bike in seconds with the optional 2 Bike Add-On (#64699)(Sold separately) - Max. load: 45 lbs. per bike

Swagman's Standard 4-Bike Fold-Down Tow-Mount is an easy-to-use and sturdy single-arm hitch rack at a great price. Quality steel construction ensures durability and long life. Swagman's protective and secure rubber-lined and knob-tightened cradles quickly and easily adjust to safely hold up to four bicycles by their frames. This rack also folds down so you can conveniently access the rear of your vehicle. Plus, it even includes a 3,500-pound rated tow bar for 2-inch receivers/hitches!

Wrap your aftermarket or OEM cross bars with these closed-cell foam pads, covered in UV protected cordura and secured with industrial grade Velcro. These allow you to mount your SUP or other gear directly to the cross bars while keeping them safe from the hard steel/alloy cross bars. - Carries: Single SUP or surfboard - Soft yet firm, high-density padding to protect your surfboard or SUP board - Industrial strength Velcro secures the pads to cross bars

Wrap your aftermarket or OEM cross bars with these closed-cell foam pads, covered in UV protected cordura and secured with industrial grade Velcro. These allow you to mount your SUP or other gear directly to the cross bars while keeping them safe from the hard steel/alloy cross bars. - Carries: Single SUP or surfboard - Soft yet firm, high-density padding to protect your surfboard or SUP board - Industrial strength Velcro secures the pads to cross bars

- QR fork mount for storage or transportation - Includes hardware for mounting to factory truck-bed track systems - Durable alloy construction

Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.

- Universal fork mounting block for transportation or home storage - Includes adapters to work with standard QR, 12mm, and 15mm thru axles including boost applications - Durable alloy construction - Skewer not included